Products

1.Notched collar design allows for a smaller minimum compressed OD of the bows
required in close tolerance applications
2.Slip-on design removes hinge as another way to reduce minimum OD
3.Recommended with integral set screws on the collar

1.Designed for use in deviated applications
2.Where low running forces and higher restoring forces are vital to casing running operations.
3.Directly installed onto the pipe
4.Over the coupling option also available
5.API standard

1.Specifically designed deflector blades
2.Available with slip on and hinged types
3.Deflect fluid flow in a turbulent spiral
4.Helping break-up drilling mud when running casing
5.Improving mud removal during circulation

1Sizes from 5-1/2" to 20"
2.Single/Double Valve
3.Thread:LTC,STC,BTC and Premium thread
4.PDC Drillable
5.Cementing Infilling

1.Sizes ranging from 4-1/2" to 20"
2.PDC Drillable Plugs
3.Aluminum/Phenolic core inside
4.Up to 200 degree Fahrenheit or more
5.Decrease drill out time

1Sizes from 5-1/2" to 20"
2.Single/Double Valve
3.Thread:LTC,STC,BTC and Premium thread
4.PDC Drillable
5.Cementing Infilling

1.Sizes ranging from 4-1/2" to 20"
2.PDC Drillable Plugs
3.Aluminum/Phenolic core inside
4.Up to 200 degree Fahrenheit or more
5.Decrease drill out time

1.Sizes ranging from 4-1/2" to 20"
2.Positive stand off the casing
3.Made of stamped steel
4.Increase turbulent flow
5.Apply in vertical well

1.Sizes ranging from 5-1/2" to 20"
2.Automatically running into the hole
3.Conventional float equipment
4.PDC Drillable
5.API and premium thread

1.Sizes ranging from 5-1/2" to 20"
2.Automatically running into the hole
3.Conventional float equipment
4.PDC Drillable
5.API and premium thread

1.Sizes ranging from 4-1/2" to 20"
2.PDC Drillable Plugs
3.Aluminum/Phenolic core inside
4.Up to 200 degree Fahrenheit or more
5.Decrease drill out time

1.Sizes ranging from 5-1/2" to 20"
2.API or Premium Thread
3.PDC drillable
4.Only Beveled upper end
5.Directly welding to the casing pipe

1.Sizes ranging from 5-1/2" to 20"
2.API or Premium Thread
3.PDC drillable
4.Only Beveled upper end
5.Directly welding to the casing pipe

1.Sizes ranging from 5-1/2" to 20"
2.Using the stab in seal sub
3.PDC drillable
4.Applying in large large diameter casing
5.Reduce net rig time

1.Sizes ranging from 5-1/2" to 20"
2.Available with Butt-welded, slip on and threaded end
3.Available with standard and texas pattern
4.PDC drillable
5.Simple&Economical Float Shoe

1.Sizes ranging from 4-1/2" to 20"
2.Apply in liner hanger
3.Extra strength and superior toughness
4.Minimize drag force
5.Resist high side load

1.Sizes ranging from 4-1/2" to 20"
2.Superior toughness
3.Positive standoff
4.Maximum flow and wellbore stabilization,holding strength
5.Decreased drag

1.Hydraulic type
2.Top/Closing Plug and First Stage/Flexible Plug
3.Battle Plate/Free Fall Opening Device/Battle Plate
4.Available in sizes 5-1/2" to 13-3/8"
5.API 5CT specification

1.Bolt lock mechanism allows for quick
2.Easy installation over casing
3.Holding force tested as per API Recommended Practice 10D-2
4.Good impact and fatigue capability
5.Used in high axial loads place

1.Utilizes spiral locking pins which, when driven in firmly
2.Lock the collar into position around the casing
3.Holding force tested as per API Recommended Practice 10D-2
4.Sizes ranging from 4-1/2" to 20"
5.With an internal groove