Sale Service Center
Tel: 0086-371-87096210
        0086-371-87096211
E-mail: sale@chinajixie.com

Cementing Plugs

Cemenging plugs are used to remove the mud during cementing operations. Two types of cementing plugs are used in the cementing process,bottom cementing plug and top cementing plug. The top cementing plug has a solid body that provides positive indication of contact with the landing collar and bottom plug through an increase in pump pressure. The bottom cementing plug is launched ahead of the cement slurry to minimize contamination by fluids inside the casing prior to cementing. Our cementing plugs including standard type and non rotating type, customers choose the right cementing plugs according to float equipment type. Inner material of cementing are aluminum alloy or Nitrile Butadiene Rubber , the plugs are easy to drill and used in high temperature.The top plug and bottom general have different color in production for easy usage in operation.


Cementing Plugs are very popular in the petroleum industry as it is quite efficient in the business. The problems that occur are more long-term normally caused by poor cementing jobs. Cementing Plugs can contribute to long-term well integrity failures, otherwise, the cost to fix these problems are highly expensive. Both the Cementing Plugs work with the right amount of co-ordination thus, the quality matters a lot. We assure you the best quality as one of the respectable suppliers in this broad industry.

Defective drilling mud removal during the cement slurry displacement in the annulus, insufficient cement height causes leakage and corrosion problems are some of the causes. In the meantime, it can cause pressure build up in the annulus between the casing strings and zonal isolation, we-control problems and the remedial solutions for this are normally expensive and difficult. It permits the slurry to flow through it and up the outside of the casing string.

  • 1.Sizes ranging from 4-1/2" to 20"
    2.PDC Drillable Plugs
    3.Aluminum/Phenolic core inside
    4.Up to 200 degree Fahrenheit or more
    5.Decrease drill out time

    Conventional Top Cementing Plug

  • 1.Sizes ranging from 4-1/2" to 20"
    2.PDC Drillable Plugs
    3.Aluminum/Phenolic core inside
    4.Up to 200 degree Fahrenheit or more
    5.Decrease drill out time

    Conventional Bottom Cementing Plug

  • 1.Sizes ranging from 4-1/2" to 20"
    2.PDC Drillable Plugs
    3.Aluminum/Phenolic core inside
    4.Up to 200 degree Fahrenheit or more
    5.Decrease drill out time

    Non Rotating Top Cementing Plug

  • 1.Sizes ranging from 4-1/2" to 20"
    2.PDC Drillable Plugs
    3.Aluminum/Phenolic core inside
    4.Up to 200 degree Fahrenheit or more
    5.Decrease drill out time

    Non Rotating Bottom Cementing Plug

  • 1.Sizes ranging from 4-1/2" to 20"
    2.Use in combination casing strings
    3.PDC drillable
    4.Withstand differential pressure
    5.Standard/Non rotating plugs type

    Combination Cementing Plug